A Quick Overview Of The Total Roof Installation Process
For those that have contemplated putting on a new roof, you may not realize that this process is actually quite complex. There is so much that needs to be done, but when you watch a professional roofer, you think that everything is somewhat easy. That’s because they are able to remove an existing roof, and put on a new one, usually within a few days. That’s because they have done this for many years or decades, and it’s simply an automatic process for them. Here is a quick glimpse of the total installation process when it comes to putting on a new commercial or residential roof.
Measurements Must Be Taken
The first step of the process is to do take measurements. This can be done with a tape measure, and you also need to measure the angle of the roof. These numbers will be calculated against the cost of the materials that you would like to use. This can be done with a simple calculator, or you could use a roofing calculator online. You also have to calculate the removal of the existing roof if this needs to be done.
Removing The Existing Roof
Although this is not a necessity, it might be what needs to happen. If you have dry rot that you have noticed when you have gone into the attic, or areas that are leaking, the existing roof needs to be taken off. This is also true if it is an older roof, or if you already have more than two layers of roofing material. Finally, if you are installing a new type of roof, such as corrugated steel, it must be a flash surface.
Installing The New Roof
You can install the new roof once you have placed all of the roofing materials on the roof itself. You will often see conveyor belts that are used to stack materials like asphalt shingles on top. Before this is done, however, tarpaper or some type of other material must be placed on top of the plywood. This will protect the lumber upon which the new roof will be affixed.
Disposing Of The Old Roof
The only thing left to do is take away the remaining roofing material. This could be an older roof that has just been removed. You may only have the remnants of the packaging for the roofing materials. It just depends on what type of project you are completing.
This entire process can be done in as little as two or three days. It may take longer for more comprehensive or larger structures. The professionals that you use can give you an estimate as to how much it will cost, and the total time that will be required. If you want to do this yourself, you might face a learning curve, but it doesn’t mean that it can’t be done. Now that you know the procedures that most professional roofers go through, you can see that it is complex but simplistic once you know how. To know more visit the website at https://www.diyroofs.com/.